On-demand InkJet Printing System

CraftPix CPJ Model

Budget model equipped with 1 print head which is also used in the CPi model.

Odoo • Image and Text

Budget Model

CPJ6151 / CPJ7861

Budget Model is equipped with the same array installed in the CPi model. With its capability of changing print resolution in x-direction by 30dpi step, it allows operators to make precise adjustment to their print quality.

Odoo • Image and Text

High-resolution printing “Type F”

CPJ6151F / CPJ7861F  NEW

CPJ models are available in “Type F”, which is equipped with a high-definition 1776 nozzles print head and a min. droplet size of 3.5pl. Combines excellent printing quality with affordability.

Odoo • Image and Text

Budget Model (Super Large Size Model)

CPJ11078 / CPJ11091 / CPJ120110  NEW

CraftPix also comes in Super Large Size Model capable of printing extremely large work size, and this custom model is offered for each of CPi, CPJ, and CPT models. Print speed and quality is equivalent of these models in standard 6151 / 7861 size. This model is also installed with single direction printing with moving print head unit, where it moves front / rear direction.

Detailed Specifications of  CPJ6151  /  CPJ6151F


CPJ6151 CPJ6151F
Max. Panel Size 24.6 x 21" (625 x 535 mm) 24.6 x 21" (625 x 535 mm)
Max. Discharge Frequency 45 kHz 80 khZ
X-axis Resolution (dpi) 360 / 720 / 1080 / 1440 600 / 900 / 1200 / 1500 / 2400
Y-axis Resolution (dpi) 360 / 720 / 1080 / 1440 / 1800 / 2160 600 / 1200 / 1800 / 2400
Min. Droplet Size 6 pl / 13 pl 3.5 pl
Number of Nozzles 1 x 1024 1 x 1776
Standard Resolution 720 dpi 600 dpi
Min. Line Width  *1 70 µm–90 µm
40 µm–70 µm
Speed *2 22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 44 seconds
22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 51 seconds

CPi6151 CPi6151F
Number of Ink Tank 1 1
Ink Tank Volume (Max.) 1000ml 1000ml
On-Head UV Lamp *3 Led-UV Lamp Led-UV Lamp
Camera Resolution 8.4 x 6.3 mm 8.4 x 6.3 mm
Air Supply: Pressure 0.5 MPa 0.5 MP
Air Supply: Volumetric flow rate 2.7 ft³/min. (75 ℓ/min.)
2.7 ft³/min. (75 ℓ/min.)
Power Supply *4
Single Phase AC200-240V 50/60 Hz
15 A 15 A
Weight 1543 lbs. (700kg) 1543 lbs. (700kg)
Dimensions [ unit: inch (mm) ]




*1 Depends on ink

*2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft.

*3 LED UV lamp to be mounted depends on the ink to be used.

*4 Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries). § Replacement of ink requires special training § CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. § Please contact MicroCraft for detailed specification.

Operating Conditions

70–75°F (21–24°C), 30–70% relative humidity

* Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas.

Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below)

Oil Mist Concentration: 1 mg/㎥ (ANR) or below

Detailed Specifications of CPJ7861 / CPJ7861F


CPJ7861 CPJ7861F
Max. Panel Size 31.3 x 25.6” (795 x 651 mm) 31.3 x 25.6” (795 x 651 mm)
Max. Discharge Frequency 45 kHz 80 khZ
X-axis Resolution (dpi) 360 / 720 / 1080 / 1440 600 / 900 / 1200 / 1500 / 2400
Y-axis Resolution (dpi) 360 / 720 / 1080 / 1440 / 1800 / 2160 600 / 1200 / 1800 / 2400
Min. Droplet Size 6 pl / 13 pl 3.5 pl
Number of Nozzles 1 x 1024 1 x 1776
Standard Resolution 720 dpi 600 dpi
Min. Line Width *1 70 µm–90 µm
40 µm–70 µm
Speed *2 22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 44 seconds
30.7 x 24” (780 x 610 mm): 59 seconds
22.8 x 17" (580 x 430 mm): 32 seconds
24 x 20" (610 x 510 mm): 51 seconds
30.7 x 24” (780 x 610 mm): 59 seconds

CPi7861 CPi7861F
Number of Ink Tank 1 1
Ink Tank Volume (Max.) 1000ml 1000ml
On-Head UV Lamp *3 Led-UV Lamp Led-UV Lamp
Camera Resolution 8.4 x 6.3 mm 8.4 x 6.3 mm
Air Supply: Pressure 0.5 MPa 0.5 MP
Air Supply: Volumetric flow rate 2.7 ft³/min. (75 ℓ/min.)
2.7 ft³/min. (75 ℓ/min.)
Power Supply *4
Single Phase AC200-240V 50/60 Hz
15 A 15 A
Weight 2205 lbs. (1000 kg) 2205 lbs. (1000 kg)
Dimensions [ unit: inch (mm) ]



*1 Depends on ink

*2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft.

*3 LED UV lamp to be mounted depends on the ink to be used.

*4 Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries). § Replacement of ink requires special training § CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. § Please contact MicroCraft for detailed specification.

Operating Conditions

70–75°F (21–24°C), 30–70% relative humidity

* Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas.

Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below)

Oil Mist Concentration: 1 mg/㎥ (ANR) or below

 Detailed Specifications of CPJ11078 / CPJ11091 / CPJ120110



CPJ11078
CPJ11091
CPJ120110
Max. Panel Size
45 x 31.1” (1142 x 790 mm)
45 x 35.8” (1142 x 910 mm)
48 x 44” (1220 x 1120 mm)
Max. Discharge Frequency
45 kHz
45 kHz
45 kHz
X-axis Resolution (dpi)
360 / 720 / 1080 / 1440
360 / 720 / 1080 / 1440
360 / 720 / 1080 / 1440
Y-axis Resolution (dpi)
360 / 720 / 1080 / 1440 / 1800 / 2160
360 / 720 / 1080 / 1440 / 1800 / 2160
360 / 720 / 1080 / 1440 / 1800 / 2160
Min. Droplet Size
6 pl / 13 pl
6 pl / 13 pl
6 pl / 13 pl
Number of Nozzle
1 x 1024 (1024)
1 x 1024 (1024)
1 x 1024 (1024)
Standard Resolution
720 dpi
720 dpi
720 dpi
Min. Line Width *1
70 µm–90 µm
70 µm–90 µm
70 µm–90 µm
Speed *2

22.8 x 17” (580 x 430 mm): 32 seconds

24 x 20” (610 x 510 mm): 44 seconds

30.7 x 24” (780 x 610 mm): 59 seconds

43.3 x 30.7” (1100 x 780 mm): 113 seconds

22.8 x17” (580 x 430 mm): 32 seconds

24 x 20” (610 x 510 mm): 44 seconds

30.7 x 24” (780 x 610 mm): 59 seconds

43.3 x 30.7” (1100 x 780 mm): 113 seconds

22.8 x17” (580 x 430 mm): 32 seconds

24 x 20” (610 x 510 mm): 44 seconds

30.7 x 24” (780 x 610 mm): 59 seconds

43.3 x 30.7” (1100 x 780 mm): 113 seconds


CPi11078
CPi11091
CPi120110
Number of Ink Tank
1 1 1
Ink Tank Volume (Max.)
1000 ml
1000 ml
1000 ml
On-Head UV Lamp *3
LED-UV lamp
LED-UV lamp
LED-UV lamp
Camera Resolution
8.4 x 6.3 mm
8.4 x 6.3 mm
8.4 x 6.3 mm
Air Supply: Pressure
0.5 MPa
0.5 MPa
0.5 MPa
Air Supply: Volumetric flow rate
2.7 ft³/min. (75 ℓ/min.)
2.7 ft³/min. (75 ℓ/min.)
2.7 ft³/min. (75 ℓ/min.)
Power Supply *4
Three Phase AC200–230 V 50/60 Hz
20 A
20 A
20 A
Weight
3748 lbs. (1700 kg)
4850 lbs. (2200 kg)
5952 lbs. (2700 kg)
Dimensions [ unit: inch(mm) ]




*1 Depends on ink

*2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft.

*3 LED UV lamp to be mounted depends on the ink to be used.

*4 Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries). § Replacement of ink requires special training § CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. § Please contact MicroCraft for detailed specification.

Operating Conditions

70–75°F (21–24°C), 30–70% relative humidity

* Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas.

Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below)

Oil Mist Concentration: 1 mg/㎥ (ANR) or below

Common Specification

Board Thickness
0.004 to 0.24" (0.1 - 6.0 mm) *5
*compatibility for thickness exceeds 0.24" (0.6 mm) is optional
Alignment CCD Camera
Monitor Touch Screen LCD Monitor
Software Windows 7 / Windows 8 / Windows 10
Data Input Format RS274X, RS274D, ODB++, DPF, DXF, BMP *6 , TIFF *6

*5 When the vacuum table is used. Figures depend on the board warpage and clamp type. Printing quality may decrease with warpage. Please contact MicroCraft for more precise figures for specific conditions.

*6 Scaling and alignment functions are not usable.

Vacuum Pump*

Power Supply Three Phase AC200 V 10 A 50/60 Hz, AC220 V 10 A 60 Hz
Capacity
50 Hz: 20.7 ft³/min. (575 ℓ/min.)
60 Hz: 24.7 ft³/min. (685 ℓ/min.)
Air Coupler Size RC 3/4
Weight 187.4lbs. (85 kg)

* Depends on clamping method

Inquiries about CraftPix series

Please feel free to contact us for questions regarding the machine specs, quotes, inquiries for a brochure from the following phone number or the inquiry form. The equipment seen in the lineup are customizable to address your needs.